Heavy Hitter Surron V2 Skid Plate

$249.89 USD
Shipping calculated at checkout.

Life Time Warranty: "Side Rails Only" We are so confident in this skid plate that we will replace the side rails if they ever bend for FREE!
(Not applicable to bash plates, replacements are available upon request).

Heavy Hitter has redesigned your favorite skid plate to include fitment for EBMX  Motors, Re-optimized angles for enduro, and tighter fitment to controllers.

Meet the last skid plate your bike will ever need. With 7075 T6 billet aluminum side supports and replaceable bash plates, the Heavy Hitter Skid Plate can withstand a whopping 6,000 lbs of force, making it the end-all protection solution for Sur Ron & Segway, E-Motos. 

The most vulnerable part of our E-Motos is the motor. It’s at the very bottom of the frame, right where obstacles like rocks, roots, and logs can strike at a moment’s notice. Unfortunately, Sur Ron, and Segway make their bikes with skid plates that lack critical support structures. 

The Heavy Hitter Skid Plate has the perfect strike angle for logs, rocks, and other obstacles. With a thick 10mm aluminum bash plate, extended tail section, and strategically placed venting, our skid plate offers top-notch motor protection for on-road and off-road use alike. And if you do happen to damage it, the replaceable bash plate can be switched out for a new one in minutes.

Features

  • The most robust, over-engineered skid plate on the market for your e-moto
  • Made from 7075 T6 billet aluminum with a 10mm bash plate tested to withstand over 6,000 pounds of force
  • Strategic ventilation slats keep your motor cool while ensuring maximum protection
  • Extended tail section offers enhanced protection from perpendicular strikes
  • Each section is easily removable for routine bike maintenance
  • Replaceable bash plate can be exchanged in minutes

Fitment

Vehicle Fitment

  • Sur Ron LBX
  • Sur Ron S
  • Segway X160
  • Segway X260

This is the known and tested compatibility for this product. Factory variations, dealer options, and aftermarket modifications could affect compatibility in your specific case. Please verify compatibility to the best of your ability before purchasing.

Guides

Installation note: We recommend using a blue medium thread locker on all hardware during installation. Mounting bolts are T20 Torx bolts; the recommended torque value is 2.6 Nm / 1.92 ft-lb / 23 in-lb. This is barely hand-tight, but as long as the blue medium thread locker is used and correctly applied, this will hold securely and be removable.


Color: Black

 More payment options

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Curious About Sizing?

Given the massive variety of clothing we carry, a standard sizing guide is incredibly helpful for customers seeking the best fit.

Please understand that surplus varies widely in fit and cut and this sizing chart is general advice rather than tailor-level fitting.

Nearly every military has different sizing charts and schemes, which is why we've taken the time to put together this brief tutorial.

 

Jacket & Shirt Sizing

In absence of an established military size chart, we measure each jacket or shirt from armpit to armpit to get a rough idea of how it fits. If a garment is between sizes, we mark it one size down. For example, if a shirt measures 19.75" from pit to pit, it is marked as a small rather than medium.

To measure pit to pit, close up your shirt or jacket and measure from armpit to armpit. 

This is our measurement guide that we use to measure garments without an existing military size chart:

14"-15" PtP = XXS

16-17" PtP = Extra Small

18"-19" PtP = Small

20-21" PtP = Medium

22-23" PtP = Large

24-25" PtP = Extra Large

26-27" PtP = XXL

28-29" PtP = 3XL

Pant Sizing

We typically convert pants to US waist and inseam sizes. If a pair of pants is between sizes, we mark it one size down. For example, if a pair of pants measures as a 33 waist, it is marked as a 32 waist.

To take these measurements we lay a pair of pants flat on the ground. We then measure across the waist and double the measurement. For example, if a pair of pants measures 16" across the waist it will fit a US 32 waist.

To determine inseam we measure from the crotch seam to the bottom of the cuff. For example, it a pair of pants measures 30" from the crotch seam to the bottom of the cuff we will list it as a 30 inseam or 30L.

Surplus Condition Guide

  1. Unissued
    1. These items are brand new. They may sometimes exhibit signs of storage. They may be new in their original factory packaging, but most times will not be. 
    1. Issued; Good / Issued
      1. These items are in issued/used condition but are fully functional. This grade of surplus item may also exhibit signs of use such as stampings, small stains or general dirtiness.
      2. Issued items will not have missing or broken buttons, zippers or be missing any functional components unless noted as such in the product description. Any items you purchase that are marked as "Issued; Good" but exhibit these defects will be replaced free of charge by Americana Pipedream.
      1. Grade 2
        1. These items are in issued/used condition but have defects that impede function. This may include missing buttons, broken zippers, holes and tears. They may also be missing components.
        2. This is the lowest grade of surplus item that we carry and they are not eligible for returns or exchanges due to condition.

      Prop 65 Warning

      All products that are NOT INTENDED FOR CONSUMPTION OR NOT FOOD PRODUCTS fall under this warning:

      “WARNING: This product contains a chemical known to the State of California to cause cancer.” WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.”

      Delivery and Shipping

      Americana Pipedream keeps its inventory on-hand and ships directly to you from our warehouse in Appleton, Wisconsin.

      We typically ship orders within 3-5 business days. During busy periods this can be 7-10 business days, sometimes longer. We are a small business and appreciate your patience.

      Payment & Security

      Payment methods

      • American Express
      • Apple Pay
      • Diners Club
      • Discover
      • Google Pay
      • Mastercard
      • PayPal
      • Shop Pay
      • Visa

      Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

      mgctlbxN$M360 mgctlbxV$4.6.13 mgctlbxL$C